Wobble Toggle Fidget Switch (print-in-place)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Using a flexure spring and an over-center mechanism to create the classic toggle switch in an interesting way.
WobbleToggleSoft.stl has a thinner spring for a softer click and is currently my **recommended version**. WobbleToggle.stl is the original version and WobbleToggleLoose.stl is the original version but a bit looser (0.3 mm clearances).
Shouldn't need any lubrication, but like all mechanical prints, it can benefit from a little oil, wax, or soap in the joints, especially if you use PETG (which has relatively high friction with itself).
Update 18 July: made some minor changes to the geometry to improve printing and feel.
Update 19 July: made a small chance to the spring to reduce strain in the center.
Update 23 July: added thinner spring version
