Fidget spiral puzzle sphere

A neat fidget spiral sphere design using two identically shaped parts (one STL file, can print in 2 colors of your choice). Slide together in different ways to make some beautiful shapes or fidget.

Test printed and fits together beautifully. Generous clearances. Recommended to use a brim when printing for good build plate adhesion, 20% infill, and 3 walls (1.2mm wall thickness). See print settings for other tips. No supports needed. Check sliding surfaces are free from blobs after printing - do not force together.

"Secret" method to open: Once assembled press the top and bottom buttons simultaneously to extend the fingers and can then rotate the halves like a fidget. But some may find it challenging to completely separate the 2 parts once assembled..puzzle aspect.

See also the new/remastered Hi-Res versions : https://cults3d.com/en/3d-model/game/fidget-spiral-puzzle-sphere-hi-res-versions

Check out my other Thingiverse designs: https://www.thingiverse.com/galaxy33/designs

**PLEASE NOTE:** the design license is Creative commons, Attribution, Non-Commercial, No Derivatives - you cannot sell this design or physical prints. Sharing without ATTRIBUTION (including link to this webpage) is not allowed. If sharing you cannot change the license type.

**⚠Warning⚠**
Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents…