Articulated Kohaku River Spirit Dragon Toy
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
VERSION 2 OF KOHAKU IS AVAILABLE! THIS VERSION NO LONGER RECEIVES UPDATES.
The model is only available at the below-listed sites. It will NOT be uploaded anywhere else.
https://www.crealitycloud.com/model-detail/66f6b2e5c3bc2dd50dc78f31
https://cults3d.com/en/3d-model/game/articulated-kohaku-river-spirit-dragon-toy-v2
NOTE: The 3MF has been made using BAMBU STUDIO and may not open in other slicers! All paint data can only be obtained in Bambu Studio. The RAW STL files have no Paint data!
This Kohaku model comes in two sizes; short, and long. The short dragon has 14 joints down its body, the long has 25 joints.
The whiskers are just strips of filament that I have glued into the holes on the side of the muzzle, a filament size of 1.75mm fits in the holes nicely.
Due to the limit of 4 colours, the pupils are not black. A dab of acrylic or permanent marker works fine.
SUPPORTS NOT NEEDED. Brim is advised if printing on a textured PEI plate.
You can add another two segments to the LONG version tail and neck to make it longer, but due to limited space on the hotbed, I wouldn't make the model itself larger. I wouldn't print it any smaller as the joints will likely lose strength.
The joints can move in almost all directions. The arms and legs do not move.
There is a version of the model with a more tapered tail, if you wish.
This file covers PERSONAL use. If you want to sell prints of this model, you require a commercial license from my…
