Funko Pop! Wall Hex Modular Display System v1 (Old Version)

I have a newer version of the same design that hides the joints here: https://www.thingiverse.com/thing:6981411

These displays are based on designs I saw from other people online. However I was not satisfied with them, so I made my own design from scratch with the intention of giving them a more sleek design, use less filament, and have stronger connections.

This design is intended for the standard 4" tall POP! Funkos. These prints interlock to create whatever shape is desired.

Notable Changes made:
-Includes 3 T-slot joints at each connection instead of 2.
-Edges are filleted
-The shelf has a hexagonal shape
-The shelf has a hexagonal texture to give more grip to the figures
-The shelf as a subtle lip to prevent figures from falling off

The Hex display is mounted to the wall with the small hole in the corner of the design. It is intended to have multiple displays attached to it and won't hang properly with only one display. If the hole is too small for your preferred nails or screws, it is possible to expand the hole using a drill bit.

The design prints perfectly laying down, no supports needed.

Update(9/3/2024): Added STL of hex but without the shelf for those who want to keep the connection but not have a Pop! Funko displayed or even have space for a larger Pop! Funko to be displayed on the shelf below it.

Update(9/4/2024): Upon popular request, Added STL of various edge pieces. The system is somewhat confusing as there are 8 unique pieces that fit in different…