Day of the Dead Halloween Pumpkin - Lamp
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
**Check out all our latest exclusive designs** on our Patreon: [https://www.patreon.com/SEREV3d](https://www.patreon.com/SEREV3d)
- For getting the **rights to sell the 3d prints** of our designs, [**become a paid member on our patreon**](https://www.patreon.com/checkout/SEREV3d?rid=23799323)**:** [https://www.patreon.com/SEREV3d](https://www.patreon.com/SEREV3d)
▶ ▶[Join our Serev3D Authorized Sellers List](https://serev3d.com/authorized-sellers-list/)
**What filament to use for the Day of the Dead Halloween Pumpkin?** We recommend:
[Polymaker PLA Matte White](https://amzn.to/3C1Jdbs) (or choose beige)
**Painting recommendation if you use the white filament:**
Base Coat: Sand the print (optional), then apply a light brown or tan base coat.
Shading: Use darker browns and blacks (rub n buff or light brown acrylic paint) for dry-brushing, focusing on recesses for depth.
Highlights: Lightly dry-brush the raised areas with white or beige acrylic for contrast.
Sealing: Finish with a matte clear coat.
**Painting recommendation if you use the beige filament:**
Dabbing Technique: Apply a white or light tan coat using a sponge, leaving the brown filament visible in the recesses.
Shading/highlights and Sealing: Same instructions as above with the white filament.
**PRINT info and advice:**
If you use the print profile we provided the manual tree supports are already set up and added on the file as well as all the recommended settings, with Bambu…
