Trigun Revolver AGL .45 with mechanical parts

A Totally new make of the revolver from the original Trigun anime. This is the post repairs version with the smooth side cylinder. There is also an optional fluted cylinder if you prefer that look, you only need to print one or the other.

Added renders showing the mechanical bits inside the frame, the Angel Plant under the top cover and the break action ejection.

Features:
- Working break action with latch
- Working ejector (if you add a spring)
- Moving trigger and hammer
- Clicky noise maker for when the cylinder is spun
- Properly sized .45LC dummy cartridges
- Removable top cover to show Angel Plant
- Barrel and frame have ported cut outs

Chicago screws used for the frame pivot are a remix of https://www.thingiverse.com/thing:3776696 by T1nd3rb0x
Trigger mechanism is a remix of https://www.thingiverse.com/thing:3173889 by paulopereira

Assembly instructions:

Cylinder: If you want it to auto eject, you will need a spring with an outer diameter of no more than 12mm and in inner diameter of no less than 6mm and a length of at least 15mm. You can skip the spring if you want and just snap the ejector in place.
- Drop the spring into the central opening of the cylinder body
- Align the ejector to the cylinder body so that the square peg is aligned with the square cutout and the spring loaded hook is aligned to the cutout on the inside, this will let it snap in place and move in and out as needed without getting lost.

Upper Frame:
- Insert the barrel so that it aligns…