Collectible Card Game (MTG) Tambour Box

Playing around with the tracks mechanism made for with the [Rolling Tracks Glasses Case](https://www.thingiverse.com/thing:6804063), I decided to fashion them into tracks for a tambour lid.

https://youtu.be/qomvkPnO_fI

ALERT!: Before you attempt to make this and start printing, ensure you have a print bed large enough to print the `Tambour Tracks`; this is the longest model in the project and may not fit on smaller print beds.

Note that this is a somewhat challenging print. It has big interlocking parts that must accurately align with each other (so any misprint is probably unsalvagable), and the `Tracks` has a lot of perimeter and print-in-place hinges.

# Printing

All model files should already be in the correct orientation so that when placed in the slicer program, the correct side is on the bed.

All parts do not need brims or supports except for the Mother Shell. The print should work with any rigid material except for the `Tracks`, which requires a material good for complaint mechanism latch (e.g., PLA, PETG).

* Mother Shell
* x1
* Print with `snug` supports `over the build plate only` - unless your printer can do godly overhangs.
* Cabinet Core
* x1
* Tambour Rail Inserts
* BOTH parts A and B
* Drawer
* x1
* Tub
* x1 - EITHER the Locking Support or Tub Simple version. The Simple version does not have the hole on its floor or the cutouts for the locking divider.
* Tambour Tracks
* x1 - EITHER the loose or…