Skull Rose - Pen & Brush holder - desk organizer - Serev3D
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is the FREE single color version of the Skull Rose:)
[Join us on Patreon](https://www.patreon.com/SEREV3d) where you can download a lot of different Skull Rose versions, ring, pendant, hanger in STL and 2 fully painted multicolor 3mf formats too:
[https://www.patreon.com/posts/117883448](https://www.patreon.com/posts/117883448)
**Also, our 3 Baby Elemental dragons are out now:**
-[Baby Fire Elemental Dragon](https://www.patreon.com/posts/115174728)
-[Baby Earth Elemental Dragon](https://www.patreon.com/posts/116292862)
-[Baby Ice Elemental Dragon](https://www.patreon.com/posts/117421023)
Recommended filaments:
If you want to paint on:
-[Bambu Matte PLA](https://shrsl.com/4runi) (white)
If you plan to print without painting:
-[Bambu Dual Silk PLA](https://shrsl.com/4s0dc) or
-[Bambu Gradient PLA](https://shrsl.com/4ra69)
Printed on:
-[Bambu P1S](https://shrsl.com/4s9hc)
**Print difficulty level**: Beginner
**Recommended print settings**:
-Layer height: 0.2mm
-Wall loops: 2
-Infill: 8%, Gyroid
-Supports: Auto Tree supports, TopZ distance 0.28, BottomZ 0.2 (it will add a little amount of supports under the some of the leaf parts)
**Painting and post-processing instructions** _(optional, you can always just go straight for painting if you don't mind the layer lines as much, or use pretty gradient, silk or…
