This ball blaster assembles easily. The ball is pushed through the "fingers" until it pops out the end toward your target.
Assembly:
1. Slide the "fingers" inside the base pointed toward the front.
2. Insert the "T" part of the rod into the larger of the 2 holes on the trigger.
3. Attach the spring to the base using the 2 alignment pins.
4. Slide the rod into the base toward the front
5. Attach the trigger to the spring using the 2 remaining holes on the trigger.
Using:
Slide your pointer finger into the rings on the right side of the blaster.
Insert a ball into the left side of the blaster.
Press the trigger to push the ball into the fingers and watch it pop out the end
