Removable Desk Bin Trash Can V2
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is the second version of this project with a "fancier" bin and also the bin part is larger than the original.
Since I'm a relative newcomer to CAD and OnShape, this V2 uses some further functions in the design software that I have discovered/learnt.
This V2 bin uses the same mounting hardware as the original, so if you've already printed those 3 parts you don't need to reprint them.
The original version can be found here:
https://www.thingiverse.com/thing:6876946
Removable bin, trash can, or storage for whatever you like, that clips onto the edge of your desk.
Simply slides up off the bracket when it's time to be emptied.
Designed with OnShape, you can copy the OnShape document from here if you want to mess around with the design (you'll need an OnShape account, but the good news... it's a CAD platform that's free for makers):
https://cad.onshape.com/documents/b357f17716a928171559fa5e/w/f91cc9b9bfda8bfeb462c007/e/4d5ca68e2b3f9811d98580d3
The length, width, depth of the bin is 160x135x120mm (original version with rectangular bin was 120x80x90mm). The desk bracket is suitable for desktop thicknesses of 17-42mm (using: "Desk Bracket"/"Bracket Screw"/"Screw Pad" combination, see below for other thicknesses/combinations).
**********************************************************
Check out some of my other designs at:
https://www.crealitycloud.com/user/9054960261
**********************************************************
EDIT 03/03/25
Added 2 parts:
1) "Bracket Screw…
