Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A practical, artistic, and creepy remix of these hands from cults3D: https://cults3d.com/en/3d-model/art/2-male-hands. For the base I used four drywall anchors and wood screws to wall mount the base. Then, just slide the hand right on.
The four files you'll want to print: Right_hand_v2, Right_hand_base, Left_hand, Left_hand_base
2/4/25 UPDATE: Looks like I accidently uploaded the wrong right hand file! For anyone who has already printed the right_hand_v1 (which I've replaced with Right_hand_v2) and still want to make use of the older version of the hand, I've recreated the old base for it, just in case.
Screw specs:
Diameter: 3mm
Length: 19.5 mm
Thread pitch: 1mm (although I don't think this one really matters if you're using drywall anchors)
Printer:
Creality Ender 3
Rafts:
No
Supports:
Tree
Resolution:
0.2 mm layer height, 4 top/bottom surfaces and 2 perimeters
Infill: 20%
