Cubic moss planter
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is just a cute little planter I made. I have no idea if it'll work because my abilities at keeping plants alive are exceptionally low
I made it for moss but really you could use any little plant. You could scale it up or down too
If you have a suggestion for another style of planter lemme know
Suggested print settings are: Print file in 1 piece, oriented right side up (with the large flat side down). Print with standard quality (layer height 0.2 mm) unless you want a finer finish. Use any old auto-generated supports your slicer makes. Tree supports in Flashprint suck pretty bad so I just used regular square supports. Print temp varies on what you're printing with but I used 225-nozzle and 60-bed for standard PLA. Print speed really doesn't matter.
