Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a 40mm lift for the CEN F-450 or Sicario.
Cross brace and servo mount 100% infill.
Trusses were printed at 50% infill.
Hardware needed to finish.
[4-links]
3D printed parts, front 4-link bracket, rear 4 link bracket
2x - M3 x 4mm (top of axle screws)
4x - M2.5 x 12mm (rear of axle screws)
2x - M3 x 40mm (link screws)
Front Cen upper link
Rear Cen upper link
[40mm lift]
3D printed parts, right truss, left truss, truss brace, esc bracket
12x -M3 x 12mm (upper screws)
4x - M3 x 10mm (motor bracket)
4x - M3 x 12mm (center lower brace)
4x - M3 x 10mm (upper shock tower)
2x - Traxxas part 2444 (sway bar links)
If running aftermarket wheels these will help get the tire from rubbing and gives it a wider stance.
(images are with spacers on)
[Rear wheel hubs]
3D printed parts, 2x rear wheel hubs
20x - M2.5 x 30mm
[Front wheel hubs]
3D printed parts, 2x front wheel hubs
20x - 2.5m x 25mm
