Lamello Classic X to osVAC neo M25 - Vacuum Adapter
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This vacuum adapter for the **Lamello Classic X** — and likely also compatible with the Lamello Top 10 — replaces the original 36 mm suction stub. It allows the machine to be connected to the osVAC neo M25 system.
Compatibility has been tested with a Lamello Classic X, model year 2026.
To replace the original suction stub, loosen the screw at the rear of the baseplate, as described under “Changing the cutter” in the user manual. Then slide the baseplate slightly forward, as shown in the photo.
The adapter slides smoothly into the holder while still fitting securely and firmly.
With the new dust extraction adapter installed, the Lamello still fits in the Systainer tray as usual.
This model is my own design, with the osVAC neo M25 male plug body incorporated for compatibility. The osVAC neo M25 connector design is part of the osVAC neo system by: https://osvacneo.de
##### My Print Settings
- Printed on: Bambu Lab A1 Mini
- Nozzle: 0.4 mm
- Layer height / profile: 0.20 mm Standard @BBL A1M
- Filament: PLA
- Nozzle diameter: 0.4 mm
- Brim: Inner brim only, 5 mm
