Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Please read before printing!
This is a custom made stick for Radiomaster Pocket gimbal. little Longer and wider than the original ones.
It works for me, so if you want to change/add something leave a comment below (might update this in future or add other versions).
You need:
- M3 screw 12mm or longer (12mm can fit only 1 spacer so if you want longer sticks use longer screws and more spacers),
- M3 nut.
Print settings:
- PLA material,
- 0.12mm layer height,
- 100% infill,
- Z seam alignment random,
- Generate support off (you can manually add some support at the bottom in the nut hole if it doesnt print well)
- Can add brim as a plate adhesion so its more stable during printing.
This was printed on Creality Ender 3 v3 SE printer, so if you use different printer you may need to change some settings.
