MUYI Connecter Male Blank Hole Cover to weather proof exposed female ends
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
So not really a remix but figured I'd link to it to Go along with what tygunn had created for a Cap for the Male end of the MUYI connecter....
I apparently wired all my muyi connectors backwards, but needless to say I needed a cap for the Female MUYI connector ends that were exposed to weather for my light show which I also use for power injection. Creating a Male cap for the Female end proved to be a bit more challenging because the weather proofing with the green seal is on the Male side and there was no good way to deal/print that... (yeah probably could have used TPU or something but didn't want to get complicated with it....
Because of this I chose to sacrifice some Male ends to print this cap for the holes and use it as a blank to plug on to the female ends to weather proof them. It was the best easiest solution I could come up with.
After some various draft iterations I settled on this one which is just tight enough when putting it in to secure the clip over it.
I printed in PETG using the best quality profile in Bambu, but I will probably print in ASA.....Definitely should not be printed with PLA being outside.
