Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Overview
- Raspberry pi 4 version of <https://www.thingiverse.com/thing:7324764>
- A small portable computer that can be created using a Raspberry Pi4.
- It has a 7-inch LCD screen and a practically sized keyboard built in.
Parts used
- Raspberry pi 4
- LCD:Geeekpi 7 inch screen <https://www.amazon.com/dp/B0CHRD7CQ3/>
- Keyboard (US Layout):MCSaite mini keyboard <https://www.amazon.com/dp/B07DZZWD9W/>
You will need to disassemble the keyboard and cut off the plastic around the edges.
- UPS:Treedix 5V Uninterruptible Power Supply <https://treedix.com/ja/products/treedix5v-uninterruptible-power-supply-for-raspberry-pi-simultaneous-charge-output-provides-power-supply-via-pogo-pins-high-power-boost-circuit-compatible-with-raspberry-pi-zero-2b-3b-3b-4b>
- Battery:18650 (x2)
- Misc:
- USB flat cable (UPS to LCD) <e.g. https://www.amazon.com/dp/B095LSY9PF/>
- HDMI flat cable <e.g. https://www.amazon.com/dp/B0177ERQ08/>
- USB Tyep-A to Type-C short cable (UPS to Rpi/LCD)
- M5x30 bolts&nuts , F5-10M~F6-12M washers for hinge
- M2.5 Bolts & insert nuts for backpanel
- M2.5 Bolts for screen_top
- Double-sided tape for screen_frontpanel,keyboard_cover
- Optical fiber to guide the LED lights
- USB connector (to connect keyboard.)
- 3.5 mm audio jack
Supplementary explanation:
Because the Raspberry Pi's USB port faces outwards, the keyboard's USB connector needs to be rotated 180 degrees.
(To be honest, it's not very smart. Any good ideas?)
Using the shortest…
