FESTOOL TRION PS 300 EQ / PSB 300 EQ jigsaw to osVAC neo M25 – Vacuum Adapter
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This vacuum adapter for the **Festool Trion PS 300 EQ** and **PSB 300 EQ** replaces the original suction stub. It allows the machine to be connected to the osVAC neo M25 system.
Compatibility has been tested with a Festool Trion PS 300 EQ, model year 2026.
With the new adapter attached, the Festool jigsaw still fits in the Systainer tray as usual.
**After 3D printing, make sure the clip/lever can move freely.** Use a craft knife, if necessary, as shown in the photo.
I reviewed and tested other available 3D-printed adapters for the Festool Trion, but I was not satisfied with their fit, locking mechanism, or overall hold. That is why I designed this adapter from the ground up.
This model is my own design, with the osVAC neo M25 male plug body incorporated for compatibility. The osVAC neo M25 connector design is part of the osVAC neo system by: https://osvacneo.de
##### My Print Settings
- Printed on: Bambu Lab A1 Mini
- Nozzle: 0.4 mm
- Layer height / profile: 0.20 mm Standard @BBL A1M
- Filament: PLA
- Nozzle diameter: 0.4 mm
- Support: tree (auto), 30° threshold angle
- Brim: Inner brim only, 5 mm
