Ouispy battery case with SMA and inicator light holes
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
r3dfish made a sick Ouispy case that uses a battery, charge controller and switch. I just added holes to that case for an SMA antenna port and lights to be more visible if using opaque filaments.
r3dfish's very good tutorial is here: https://www.youtube.com/watch?v=478gFJLGO1c&t=84s
You will need:
1x Ouispy
4x 25mm screws and nuts
1x TP4056 charge controller
1x DC 3.7V 550mAh 802035 Rechargeable Lithium Polymer Battery
1x tiny power switch
Credit goes to The creator of the OuiSpy Colonel Panic and to r3dish for the original case design.
If you found yourself here and don't know what this is, it is a device that lets you do many things but mostly it runs FlockYou a program that passively hunts Flock Cameras in you vicinity. This aids in mapping them and helping bring awareness to the surveillance state we are entering into. The added SMS port allows for large antenna or antenna arrays being added to help speed up you hunt.
Taxation is theft and your privacy is important.
