Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I often touch up the paint on some of my chroma trim, coro props, pixel strips, and other things. In order to paint the prop without have to remove the pixels and re-push them so it doesn't get the pixel head I designed this small pixel Cap cover that will snap over the top and/or fit snug enough that it holds. The prop/trim can then be painted without getting the head of the pixel covered in paint and ruining it..... after it dries the cap can be removed and then the pixel top half is unaffected.
I show and example of me paining my ez trim from the stock color to Silver but it actually works even better on the chromatrim or coro props. The metal of the ez trim makes it difficult for the pixel to be pushed through enough for the cap to be able to grab the sides of the pixel that stick out to hold.
Anyhow after some different iterations I finally came to this one that seems the perfect sizing.
I included multiple files... the Single Cap cover, as well as a pre made 50 count and pre made 100 count for printing
