Shiny Mega Gengar Coin (Pokemon TCG Pocket)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I’ve made a Shiny Mega Gengar coin from the Pokemon TCG Pocket app. I’ve included a whole bunch of info if you want to print it as accurately as possible to how it looks in the app, but at the end of the day, you can probably get away with looking at the picture and assigning the colors however you want.
There’s the regular 3mf for regular purposes or a “fancy” one for 0.2 mm nozzles, especially if you have an effect plate. Their information is directly below, followed by more specific info if you’re interested.
Other coins can be found in this collection: https://www.thingiverse.com/CarlThePumpkinMan/collections/41658549/things
Regular 3mf:
For people that just want the coin with minimal hassle. 0.4 mm nozzle, the design is on top to reduce chances of adhesion mistakes messing with it, and there are only 3 layers on the design to reduce filament changes. Higher speeds and a cool plate. 3 sizes included: Regular (30 mm), Large (34.2 mm), Jumbo (51.2 mm).
Layer height: 0.28 mm
Line width: 0.4
Initial Layer Speed: 50mm/s
Outer Wall Layer Speed: 200mm/s
Infill: 100%
Support: None
Fancy 3mf:
For people that want a really fancy coin, and aren’t too worried about taking time or filament. 0.2 mm nozzle, the design is on the bottom to be used with an effect plate, 0.08 mm layer height. Slower speeds. 3 sizes included: Regular (30 mm), Large (34.2 mm), Jumbo (51.2 mm).
There’s a lot of small pieces that don’t have too much contact with the build plate, so I used…
