Display Stand for Star Wars The Black Series (6 inch) - First Order Special Forces Tie Fighter
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Massive display stand for the equally as massive Tie Fighter released in 2015 in the Star Wars The Black Series 6" action figure line by Hasbro.
Uses a pinned (dowel) joint system (As I know how much Black Series collectors love a visible pinned joint!) so no screws or special tools are required to assemble.
I do however, strongly recommend using a good super glue between joints!
Everything needs to be printed once with the exception of the lower upright (Print 2) the rear brace (Print 2) and the Dowel joints (Print 28) and you should have everything you need.
- Parts designed to fit a 256 x 256 x 256 mm print bed.
- Supports are not required (even the dowel pin has a small flat edge so it prints without support)
- Look at the pictures to be sure you have things the right way around (especially the top of the uprights, they are designed so the sloped part is on the inside!)
You are welcome to improve/remix the parts. Would be cool to see someone make a lighting rig that attaches to it!
