Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A stunning 3D-printed HueForge artwork inspired by the world of The Lord of the Rings. The piece features a wise, battle-worn wizard rendered in layered monochrome filament, creating dramatic depth, texture, and flowing detail throughout the hair, beard, and robes. The black background enhances the glowing contrast of the white filament lines, giving the artwork an engraved, cinematic appearance.
Project: HugeForge Gandalf.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.8mm
The Model is approx 271 x 503mm in size when assembled
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.47873mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (1.28mm) swap to Ash Gray
At layer #11 (1.6mm) swap to Jade White for the rest.
Tiled Printing Instructions:
Each Tile is it's own STL file (all saved in the STLs folder) with the correct Row and Column in the name.
The GridLayout.png shows each section and it's size in mm to help visualize.
It is important to note that in tiled images, some tiles will not have all of the color swaps and this is normal.
It might be possible to skip lower swaps if they will never be seen and use a Height Range…
