Expanded Screw‑In Beach Holder – Remix for Larger Cups, Mugs & Cans with Koozies

This model is a **remix** of my original screw‑in beach can holder.
The first version was designed for standard **33cl cans**, but after real‑world use I created this **expanded version with a 100 mm internal diameter**.

This wider edition can now hold:

- Larger cups and tumblers
- Standard mugs
- Cans wrapped in a **koozie**
- Bigger beverage cans
- Small bottles

The lower section keeps the same **strong spiral screw**, allowing the holder to anchor firmly into sand or soft ground.
The upper section has been **widened and reshaped** to improve compatibility while maintaining stability.

Perfect for the beach, camping, festivals, picnics, and outdoor setups.

---

#### 🔧 What’s New in This Remix

- **100 mm internal diameter** (much wider than the original)
- Fits mugs, tumblers, and koozie‑wrapped cans
- Improved internal geometry for stability
- Slightly taller profile
- Same reliable screw‑in base
- Fully printable without supports

---

#### ⚙️ Specifications

- Internal diameter: **100 mm**
- Total height: **150 mm**
- Screw length: **75 mm**
- Printing technology: **FDM**
- Designed for:
- Large cups
- Mugs
- Koozie cans
- 33cl cans (with extra room)

---

#### 🧵 Recommended Print Settings

- Nozzle: **0.4 mm**
- Layer height: **0.20 mm**
- Walls: **4**
- Infill: **20–30%**
- Supports: **Not required**
- Orientation: **Print vertically with the screw pointing downward**

---

#### 🔩 Recommended…