Catan Single Box Inlay - Base Game + Cities and Knights + Seafarer

# Single Box Inlay for Catan

At least the German versions already come with a quite nice inlay, but my main goal was to reduce the box count on my board game shelf. So here is an inlay for Catan including the two main expansions in a single box.
It is designed so that the player boxes, the card boxes, and the small parts box can be used during the game to keep your table organized.
The F3D file is provided, so feel free to remix and improve.

## Remarks

- This is designed for the German version with plastic miniatures: **game box (inside) measurements: 29 cm × 29 cm × 7 cm**. I don't know the measurements for other variants. If they match, please notify other users in the comments.
- This is designed to be printed with inlaid magnets, making this inlay relatively expensive.
- You need:
- **72 4×2 mm round neodymium magnets** for the card boxes
- **164 6×3 mm round neodymium magnets**
- 112 for the player boxes
- 20 for the small part boxes
- 28 for the Seafarer, Hexes, and Figures box. You can optionally inlay 14 more on the bottom. Then you attach the lids to the underside of the box when opened, but this is not necessary.
- 4 for the small part boxes—vertically in between the dice & helmet box.
- Slice the boxes so that you have a pause at the beginning of the layer above the respective magnet slot.
- When the printer is stopped, glue in the magnets using superglue. Then you can proceed with the print.
- **Ensure each magnet is…