Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Turn signal lever can be printed with no fill and top layer smoothing. I painted mine to get a bit closer match to the mounted area. Can be attached with double sided tape or a few small drops of super glue for a more permanent connection. Try to get rotation/orientation aligned on left and top for best look. I had to use a razor blade to pop mine off and reapply; still could be better. This was my fifth revision to get the angles to match, clear for the little bump already on the button and, get good height and radii to still allow easy access to the scroll button. Can use a silver sharpie to fill in the >, < if wanted.
