Dometic RV fridge freezer door hinge repair

My RV fridge has a small freezer compartment with a spring loaded door hinge. As the door bracket hinge piece is not that robust, it is easily broken as was the case with mine. I could not source a replacement door, fridge works fine otherwise, did not want to replace it. I drew up the file in Fusion 360, after printing, I used a dremel tool to cut off the remaining broken plastic and exposed the flat bottom surface edge of the door. After aligning the new part to position it where the old part was, I marked and drilled 5 3/32" pilot holes up into the main part of the door. Using 5 1-1/4" screws, I secured the part to the door. The tricky part is tensioning the springs of the hinge on installation, but once installed, it works perfectly! It will mount on either side of the door. Hope this helps someone else out there.