Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Stand for holding Beyblade x Ratchets
Requires 2x stand1, 2x stand2, and 54-55x rachetholder, along with 4 rods 12" long with an 1/8" diameter. You could use longer rods to hold more, but would worry about stability.
Stands are easily, assembled, just slot stand1 into stand2 and glue together. then insert rods into the holes in the stands. Place 14 of the rachetholders onto each rod, except the bottom one. You can either put 12 rachetholders on the bottom and have a bit of a gap, or you can trim a rachetholder to 50% length and put it + 12 full size rachetholders on the bottom to minimize gaps.
