Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Block off plate for the fuel pump. Will work on any small block Chevy of the LT version. 305 to 350.
There are two files as one is .3MF and other is .STL
Recommend Print settings:
4 Walls
8 to 12% Infill
PLA if it wont be outside in the sun, PETG if it will see lots of sunlight.
These do not need to be tightened down tight, they are just a cover to keep dust out.
