Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a plug for the Distributor, This just sits in the hole, if you spin this engine upside down on a engine stand this plug will fall out.
Be advised, you'll see 2 of each number as there is 3MF files and STL files.
Recommend Print settings:
4 Walls
8 to 12% Infill
PLA if it wont be outside in the sun, PETG if it will see lots of sunlight.
These do not need to be tightened down tight, they are just a cover to keep dust out.
