Holley 4150 Carb hat with or without Spark Plug holder
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Holley Carb hat. Model I made this for is a 4150, Specifically 650 Double Pumper w/ mechanical choke.
Please pay attention as to how the orientation of print is on the slicer program. Make sure the print is orientated to be upside down (Flat portion print bed down) this will be best print and no supports needed.
(You as the downloader need to make sure this size of hat will fit the carburetor model they have, 4150 has a 5.0625" to 5.125" diameter airhorn) This print is 5.125" inside diameter.
Be advised, you'll see 2 of each number as there is 3MF files and STL files.
Recommend Print settings:
4 Walls
8 to 12% Infill
PLA if it wont be outside in the sun, PETG if it will see lots of sunlight.
These do not need to be tightened down tight, they are just a cover to keep dust out.
