Home air filter using truck cabin filters
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Filter partnumber is 81.61910.0011. It's from Shacman/Shaanxi dump trucks. Size(intended) is 178x396x38mm. Be careful, aftermarket filters may slightly vary in dimensions. They could be deformed to fit though, just won't look good.
This filter body consists of 8 base plates and 8 stands. All of those were printed on a 220x220 base plate printer. ~550g of PETG was used. They could be connected together by m3 screws and nuts, or cable ties. There are no seals, so best to assemble it on some sort of sealant or add duct tape. Dimensions of assembled unit are 405mm length, 315mm width/height(if standing on a corner as is on photo)
It is intended to use 12V 120mm PC fans because i had those available, but adaptation for bigger fans is very welcome if anyone wants to try. I may do it later if i wouldn't be satisfied with this version. Remixes are welcome.
