Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A ~4° wedge riser for cruising and carving setups. By angling the front truck forward, this wedge increases turn responsiveness and makes carving much more fluid. Pair with a flat wedge on the rear truck (counter-wedge) to add stability, or run wedges on both trucks for a full surfskate-style feel.
Front height: 6 mm / Rear height: 2 mm → wedge angle ≈ 4.2°
Features:
• Front 6 mm / Rear 2 mm wedge geometry
• New / Old School hole pattern: 6 holes (4 Old School + 2 New School rear)
• Through-hole bolts (Ø 6 mm)
• Laser-engraved riser3d logo on the bottom face
• Designed in riser3d.com
Print Settings:
• Material: PETG or ABS
• Infill: 100%
• Layer height: 0.2 mm
• Supports: None required (wedge angle is shallow)
• Orientation: Flat (thicker) side down
