Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A high-angle ~10.5° wedge riser for surfskate-style setups and deep carving. Front 14 mm / Rear 4 mm — this geometry dramatically increases the lean-to-turn ratio on your front truck, giving you a surf-like pumping motion without a special surfskate adapter.
Works great with RKP (Reverse Kingpin) trucks or any high-angle truck. Run a flat counter-wedge on the rear for maximum surfskate feel, or this wedge on both trucks for aggressive carving.
Front height: 14 mm / Rear height: 4 mm → wedge angle ≈ 10.5°
Features:
• Front 14 mm / Rear 4 mm extreme wedge geometry
• Slot hole pattern: maximum adjustability for truck positioning
• Through-hole bolts (Ø 6 mm)
• Laser-engraved riser3d logo on the bottom face
• Designed in riser3d.com
Setup Recommendations:
• Front: This wedge (front-high) - Deep carve, surf-pump
• Rear: Flat 4-6 mm - Stability + minimal rear turn
• Rear: Counter-wedge (rear-high) - Maximum directional stability
Print Settings:
• Material: PETG or ABS
• Infill: 100%
• Layer height: 0.2 mm
• Supports: Recommended for the thin rear edge
• Orientation: Flat (thicker) side down
