Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I do a lot of turkey hunting and way too often, while I am alone, I am trying to find a way to support the stock of my shotgun while operating a pot call or some other type of call. Well, the stock inevitably falls down and makes a racket. A company called M.A.D. used to make this same product and it was called the “shooters aid” but they have since quit making them. This is a free way for anyone to have the same product at home. I recommend printing with at least 4 walls/shells in PETG or PLA+. Something durable so it will last. I have included my slicer settings down below along with the extras you need to fully complete this setup. If you like it, let me know!
5 shells/walls
25% infill triangle
Normal supports .25 from bottom and .2 from top z distance
Need:
-2 high strength velcro straps (every gun is different so get the right length for you)
-some type of rubberized foam stripping to put in the channel against the stock to keep from slipping
