Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is an adapter to screw onto an IBC tote. This one is for a tote that has a S60x6 thread on it. It has a female thread with the S60x6 thread and a male thread with a 2 inch NPT thread. This has been done before, but I'm not certain it has been done with a proper 2" NPT thread which is tapered (as opposed to a straight thread). My apologies for not taking photos before installing it on my tote (which is why I included screen-shots from my slicer). It is installed and working great with no leaks. The fitting was printed with PTEG and the gasket is TPU. There is a groove for the gasket to seal against the tote outlet.
Print with the 2" pipe thread on the bed. No supports needed. I printed everything at 100%.
