Anker Soundcore 4 NC 3rd party tip adapter 6mm
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
SC4NC adapter that will fit Custom Silicone tips with these dimensions:
Inner tube: 6mm with 4.5 retaining ring
Inner tube length 7mm
The box closes with the tips on, if you need to use 5mm Silicone tips, you can modify the file provided.
I used PLA, this should fit without damaging the buds at all, BUT, please be gentle, as the buds have a very thin retaining clip.
These need to be glued with some kind of glue that won't damage plastics (please don't use CA glue!), but they stay there pretty good just by themselves.
You need to sand the base until the elephant foot is gone, this will ensure you pass the FIT test if you don't glue them.
This will also lower them a little bit, so I actually recommend it.
