Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is the small signal lever that often suffers from Mazak rot on older 00 gauge signals and the gantry arm which is often missing or broken.
The signal lever needs no support and will print with on a Kobra2 Max with 0.2mm nozzle. The gantry arm needs support and possibly rotating 90 degrees on the printer bed so that the fill lines look like vertical venetian blinds supporting the structure (check with this preview before you print). Using Cura, use Support pattern lines, Support line Distance 1.0mm, support Z distance 0.1mm from top and bottom, support X/Y distance 0.7mm and Z overrides X/Y.
