Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a fixture to help align your mag-safe phone with Qi wireless chargers that are independent of the built-in phone chargers in the Tesla Cybertruck. Qi wireless chargers require precise alignment of the coils and the Cybertruck's chargers have no magnetic lock or feedback mechanism to provide this alignment. As a result, it attempts to charge when the phone is 'close enough' and ends up heating the phone instead of charging it. The magnets in the chargers for this fixture addresses that problem and the phones charge normally and don't get hot once they lock into the magnets. The magnets keep the phone from moving around in turns and accelerations/decelerations. It allows the camera bumps to hang out of the top of the fixture so that closer contact can be made with the coils, improving efficiency. I've seen other similar fixtures, but I could not print them on my 220mm x 220mm printer bed, so this design is reduced in size to allow for smaller 3d printer beds. I've been able to print them on my Creality 3 pro and FlashForge AD5X printers without issues.
Amazon Links:
2 wireless chargers
https://www.amazon.com/dp/B0F59GP75W
USB-C Y-cable splitter (optional, to use the single USB-C port inside the console instead of running cables to rear USB-C console ports)
https://www.amazon.com/dp/B0DSZCVCPT
Silicone rubber insert (optional, works with or without it)
https://www.amazon.com/dp/B0DG6498M5
