Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I have a Refoss EM16 energy monitor. My breaker panel is set inside the wall, so I can't stick the antenna into a knockout hole on the side of the panel. I designed this bracket so I can mount the antenna to the wall next to the panel.
The hole in the top is 3/4" (19mm) which is a nice snug fit for the rubber grommet on the antenna. I also added clips to the bottom to hold the wire close to the wall.
There are 3 versions. There is one for machine screws, one for countersunk screws, and one with no holes for double sided tape.
antennaAntenna holderantenna mountbracketEM16energy monitorEnergy Monitoringhome assistantIoT Mains Energy Monitormounting bracketopen energy monitorRefoss
