Dodecahedron Lamp

Dodecahedron lamp made using a laser cutter. (Hanging or desk lamp)

Made using Fusion 360
Source file: http://a360.co/2pf1Mle

Required materials:
-------------------------
* Wood glue or glue gun for wood, or acrylic glue if you are using acyl.
* 3 mm (1/8 inch) wood or acrylic sheet of your choice.
* Sanding paper (Grid 160 or higher).
* Power cable.
* E14 socket of your choice.
* Use some latex gloves if you are working with acrylic glue.
* 5x 3mm/10mm screw
* Optional: Switch and / or wall socket.

Required tools:
-------------------
* Screwdriver set.
* Laser cutter. (40w or higher)

Specifications:
------------------
Dimensions: 375mm x375mm x 375mm.
Faces: 12
Parts: 163
Socket: E14
Number of vertices: 20
Number of faces: 12
Number of edges: 30

Step 1: Cutting the Parts
-------------------------------
First we need to cut all the required parts in the laser cutter.
We us Visicut at our local makerspace to create the gcode for the laser cutter.

I took the liberty to create 3 nested files containing all required parts.
They are made for 450mmx600 3mm sheet material. (nested450-600sheet1.dxf, nested450-600sheet2.dxf, nested450-600sheet3.dxf )

If you have another laser bed size you will need the following files to be cut.
150x link.dxf
11x side.dxf
1x er27.dxf (e14)
1x top.dxf

Step 2: Preparation
-------------------------
Wood: Use some sanding paper with fine grit (160 or higher) to clean up burn marks from the laser…