AEG Comfort 6000 AXP26U559HW & AXP26U558HW Complete Dual-Hose Kit

by MichaelQ (cover set) & wejn (hose connector) · from Hark Tech

Small parts from £4 for customer-directed manufacture of one copy, plus UK postage · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Personal use only Household

Manufacture one personal-use copy → View original design

Customer-directed manufacturing

Manufacturing service from £4 plus UK postage. The design itself remains supplied under the creator's licence. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. Copies (limited to one)

This is not a catalogue product sale. The creator has licensed the design for non-commercial use. You may appoint Hark Tech as your manufacturing agent to retrieve the file and make one physical copy solely for your own personal, non-commercial use. You must review and accept the declaration before we retrieve or slice the file.

Good to know before you order

TPU has a £13.80 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £13.80 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

Everything you need to convert an AEG 26-series heat pump portable air conditioner to dual hose, in one order: the rear intake cover (top and bottom halves), the hose inlet ring that takes your original mesh filter, four alignment strips, and a hose connector that twists into the ring and screws onto a standard 15 cm hose. Pick your material and colour and we print the full kit.

Fits: AEG Comfort 6000 heat pump AXP26U559HW (customer-confirmed, September 2026) and AEG ChillFlex Pro Silence AXP26U558HW (same rear casing, checked against rear photos and AEG's manuals for both models; fit on this model not yet customer-confirmed).
Not for the AXP34 / EXP34 series: use our AXP34 kit instead.
Not included: the 15 cm hose and a second window adaptor.
Assembly: bond the two cover halves with the alignment strips. The designer recommends a fast-setting epoxy.

Cover set designed by MichaelQ (Printables 473661: https://www.printables.com/model/473661), hose connector by wejn (Thingiverse 4519730: https://www.thingiverse.com/thing:4519730), both licensed CC BY-NC-SA. We print one personal-use copy for you as your manufacturing agent. Photo: wejn.

Will it fit my air conditioner?

Fits the AEG Comfort 6000 heat pump AXP26U559HW (customer-confirmed, September 2026) and the AEG ChillFlex Pro Silence AXP26U558HW (same rear casing). The AXP26U558HW match is checked against rear photos and AEG's manuals for both models, but not yet confirmed by a customer fit. The hose inlet ring takes the original mesh filter. Not for the AXP34 / EXP34 series. You supply a standard 15 cm hose and a second window adaptor.

See the model compatibility guide →

Printing AEG Comfort 6000 AXP26U559HW & AXP26U558HW Complete Dual-Hose Kit

For AEG Comfort 6000 AXP26U559HW & AXP26U558HW Complete Dual-Hose Kit we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

File type	3MF
File size	4.2 MB
Category	Household
Original design	View the credited source
Designer	MichaelQ (cover set) & wejn (hose connector)
Licence	CC-BY-NC-SA

More popular Household models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts