A single-hose portable air conditioner fights itself: it pushes room air outside and sucks warm air back in through every gap. These printed adapters give AEG Comfort 6000 and Electrolux ChillFlex units a second-hose intake, so the condenser breathes outside air instead of stealing it from the room. We hold the files, print to order and post them tracked across the UK.
Community designs by L.T, Filamentos and kulfürst on Printables, shared under Creative Commons. They are not our models: we are the print service, and we print and post them for you.
A single hose blows your cooled indoor air outside. That air has to be replaced, so warm outdoor air is pulled in through gaps around doors and windows. You are cooling air just to throw it away.
Because warm air keeps leaking back in, the unit runs longer to hold the same temperature. On the hottest days, when you need it most, a single-hose unit can struggle to keep up.
A second hose feeds the condenser with outdoor air instead of room air, so the room stays sealed and cools faster. It is the same principle used by higher-end portable units that ship dual-hose from the factory.
Check the model number on the sticker on the back or side of your unit, then pick the matching adapter. Each one is a community design we print to order.
A two-part adapter designed exclusively for the AXP26U339CW. This is the version a customer ordered from us this week. Order Part A and Part B together.
Print for me →
A remix of the ChillFlex conversion that fits a 150 mm connector and hose on the AXP26U338CW.
Print for me →
The original, well-proven ChillFlex dual-hose mod (260+ downloads). Printed in three sections: order the Top, Center and Bottom parts together.
Print for me →Different AEG or Electrolux model? Send us the model number and we will check what fits, or browse adapters for other brands.
These designs are large, so the designers publish them both as one big piece and as smaller split parts. The one-piece Full or Whole files are bigger than any normal print bed, including ours, and the quote tool will tell you a part is too large if you pick them.
On the order page, use the file picker and add the split parts instead:
The printed parts join together on the unit. If you would rather we just sort it, message us on WhatsApp and we will send you a quote with the right files picked.
As a guide, the AEG Comfort 6000 pair printed in PLA came to £24 on a recent order. We recommend PETG for parts that sit on the warm side of the unit or near a sunny window: it costs a little more and lasts much better in heat. ASA is the choice for strong direct sun. The order page shows the exact live price for your material and colour before you pay. Postage is £3.95 Royal Mail Tracked 48, free on orders over £40.
A single-hose portable air conditioner pulls air from inside the room to cool its condenser, then blows that air outside. That creates negative pressure indoors, so warm unconditioned air gets sucked back in through gaps around doors and windows. A dual-hose setup gives the condenser its own outdoor air supply, so it does not depressurise the room. The result is faster, more efficient cooling, especially on hot days.
Check the model number on the sticker on the back or side of the unit. AXP26U339CW takes the two-part Comfort 6000 adapter. AXP26U338CW takes the 150 mm ChillFlex Pro remix. Other ChillFlex models are usually covered by the original three-part ChillFlex mod. If you are not sure, send us the model number and we will check before you pay anything.
You have picked the one-piece Full or Whole file, which is bigger than any normal print bed. Use the file picker on the order page and add the split parts instead: Part A plus Part B for the Comfort 6000, or Top, Center and Bottom for the ChillFlex. Each split part fits our printers and the quote will price normally.
You supply one standard portable-AC exhaust hose for the new intake, which is a cheap and widely available part. Everything printed is included in the parts listed. If you are unsure which hose fits, message us before ordering and we will point you to the right one.
You do not need to upload anything, we already hold the print-ready files. Open the order page for your model, add the split parts, pick your material and colour, and check out. Postage is £3.95 Royal Mail Tracked 48, free on orders over £40. We print to order and post from our workshop in Basingstoke, usually within a few working days. UK delivery.
Printed adapters from £24. PETG recommended for heat. Printed to order in Basingstoke and posted tracked across the UK: £3.95 postage, free over £40.
