Hose adapters, window kits and dual-hose conversions for portable air conditioners – Blyss, Daewoo, Midea, Meaco, Electrolux, Bosch, Trotec and more. Community-shared designs for specific models, printed to order in heat-resistant material in our Basingstoke workshop and posted tracked across the UK.
Use the model list for ready-to-order adaptors, shrouds, connectors and window fittings. If your installer, manufacturer or designer supplied a STEP, STL or 3MF file, send it straight to the estimator.
Our most-asked-for part this summer: the complete printed kit (rear intake backplate + hose adapter) that converts the common B&Q Blyss A018I-12CH from single-hose to dual-hose. From £39, printed to order.
Also in demand this week: the Lidl Silvercrest SMK 7000 adapter and AEG Comfort 6000 & ChillFlex conversions.
Every part links to its order page: pick a material and colour, the live price appears in seconds, and we print and post it. Designer credit and the original source are shown on each page.
Our bestselling portable air-con part: exact for Blyss A018I-12CH. Blyss A018I-09C, 09CH and 12C plus Daewoo COL1579GE / A018B-12CH are same-case candidates subject to a rear-photo check. From £39 printed.
See the Blyss kit →Complete three-part intake adapter with M3 hardware. Confirmed on AXP34U338CW/339CW; related Electrolux EXP34 variants are listed as photo-check candidates. From £34.50 printed.
See the confirmed-fit kit →Converts the lower intake of Lidl’s SMK 7000 B2 into a round hose connector for a dual-hose setup. From £13.50 printed.
About the adapter →Two-part adapters for AXP26U339CW and AXP26U338CW, plus a researched list of related AEG/Electrolux EXP26 shared-casing models to check by rear photo. From £24 printed.
Find your model →No brand-specific kit for your unit? This universal intake adapter converts most single-hose portables to a dual-hose setup. From £6 printed.
See live price →Replacement exhaust hose connector for the MeacoCool MC series, in 100 mm and 150 mm sizes, plus the parts to add a second hose. From £16.50 printed.
Find your part →Replacement exhaust hose connector for the Black & Decker BXAC40005GB portable. From £11 printed.
See live price →Adapts a rectangular 180×120 mm outlet to a standard 150 mm threaded hose. From £15.50 printed.
See live price →The popular dual-hose conversion for Electrolux and AEG ChillFlex portable air conditioners. Printed in three sections that join on the unit; our guide shows which files to order.
Which parts to order →Pairs with a dual-hose conversion: a 150 mm intake funnel so the condenser draws outside air. From £21 printed.
See live price →Twin-hose adapter for the Trotec PAC 2100 X portable air conditioner.
See live price →Cold-air input adapter for the Qubo Q40HD portable air conditioner.
See live price →Replacement drain spout for Hisense portables when the original is lost or snapped. From £6 printed.
See live price →Clips a fabric window seal neatly in place around the hose outlet. From £6 printed.
See live price →We print from a catalogue of over 100,000 community-shared designs, so there is a good chance a part exists for your unit. Search the catalogue, or tell us your make and model and we will look for you.
Tougher than PLA and handles the warm exhaust side well. Our default choice for air con parts and only a little more than PLA.
The most heat and UV resistant option. Pick this if the unit sits in a conservatory or strong direct sunlight.
Cheapest and available if you ask, but it can soften in sustained heat and sun, so we do not recommend it for these parts.
Usually, yes. Most of the parts on this page exist precisely because the manufacturer stopped selling the accessory. They are community-shared designs for specific models, and we print them to order. If your model is not listed, search the catalogue or send us your make and model and we will look for a design that fits.
A single-hose portable air conditioner uses cooled room air to cool its condenser and blows it outside, which pulls warm air back into the room through gaps. A dual-hose setup feeds the condenser with outdoor air instead, so the room stays sealed and cools faster. Several of the kits on this page add the second-hose intake to popular single-hose units.
We recommend PETG or ASA. These parts sit on the warm exhaust side of the unit and often near a sunny window, and standard PLA can soften in sustained heat and direct sunlight. PETG is our default; ASA is the most heat and UV resistant option for units in strong sun.
No file needed. Open the part page for your model, pick a material and colour, and the live price appears in seconds. We print it to order in our Basingstoke workshop and post it tracked across the UK, usually within a few working days.
No. They are independent, community-shared designs made by makers for their own units and shared under open licences, and we print them to order. They are not affiliated with or endorsed by the appliance manufacturers. Designer credit and the original source are shown on every part page.
No. We are a print workshop, not a design studio. Every part here was created by an independent maker who is credited and linked on the part page, and we print their designs to order. If your unit is not listed, send us your make and model and we will happily search the community libraries for an existing design. Each design's licence decides whether we can print it. If nothing exists, our design partner CEEQ Design can model a part from scratch as a paid design job.
