Hose connectors, tap fittings, sprinkler and irrigation parts, water butt accessories, pressure washer and robot mower spares. Printed to order in weatherproof material and posted tracked across the UK.
Pick a material and colour on the part page and the live price appears in seconds. Designer credit is shown on every page.
Male and female click-style hose connectors with standard BSP threads, the pattern used on most UK garden hoses. From £6 printed.
See live price →Snap-on connector for a standard 3/4″ threaded outside tap, so the hose clicks on and off instead of unscrewing. From £6 printed.
See live price →Joins two click-fit hose ends back to back, handy for extending a hose or bridging a reel. From £6 printed.
See live price →Adapts a click-style hose fitting to a G3/4 male thread for taps, timers and valves. From £6 printed.
See live price →Caps off an unused click-fit hose end so a splitter or manifold does not dribble. From £6 printed.
See live price →Adapter for Rain Bird Maxi-Paw impact sprinklers onto a 1/2″ NPT riser. From £6 printed.
See live price →Blanking plug for a Rain Bird Maxi-Paw sprinkler body, for capping off an unused position. From £6 printed.
See live price →Sits around a pop-up rotary sprinkler head so the mower and strimmer keep their distance. From £7.50 printed.
See live price →Adjustable sprinkler nozzle for drip irrigation tubing, for spot-watering beds and pots. From £6 printed.
See live price →Filters leaves and debris out of the downpipe feed before they reach your water butt. From £6 printed.
See live price →Starts a siphon with a few shakes, for draining a water butt, paddling pool or tank through a garden hose. From £6 printed.
See live price →Holds the trigger of a Kärcher pressure washer gun on, saving your grip on long cleaning jobs. From £6 printed.
See live price →Community repair design for the Kärcher K3.80 pressure washer gearbox, rescuing a machine the spares catalogue gave up on. From £6 printed.
See live price →Studded replacement wheel that gives a Worx Landroid robot mower proper grip on slopes and wet grass. From £13 printed.
See live price →We print from a catalogue of over 100,000 community-shared designs, so there is a good chance a part exists for your kit. Search the catalogue, or tell us the make and model and we will look for you.
Tough, waterproof and happy in the sun. Our default choice for hose fittings and watering parts, and only a little more than PLA.
The most UV and weather resistant option. Pick this for parts that stay outside through winter, like sprinkler rings and water butt fittings.
Cheapest and available if you ask, but it softens in summer sun and goes brittle outdoors, so we do not recommend it for garden parts.
Usually, yes. Most of the parts on this page exist because the original accessory broke, got lost, or was discontinued, so a maker designed a printable replacement and shared it. We print those designs to order. If your part is not listed, search the catalogue or send us the make and model and we will look for a design that fits.
For normal garden use, yes. These are community designs proven on real hoses and taps at ordinary outdoor tap pressure, and we print them in PETG or ASA, which shrug off water and sunshine far better than standard PLA. They are garden fittings, not plumbing parts: we do not recommend printed fittings for indoor mains pipework or hot water.
We recommend PETG or ASA. Garden parts live outside in sun and rain, and standard PLA can soften and fade over a summer. PETG is our default for hose fittings and watering parts; ASA is the most UV resistant option for parts that stay outdoors all year.
No file needed. Open the part page, pick a material and colour, and the live price appears in seconds. We print it to order in our Basingstoke workshop and post it tracked across the UK, usually within a few working days.
No. They are independent, community-shared designs made by makers for their own gardens and shared under open licences, and we print them to order. They are not affiliated with or endorsed by the equipment manufacturers. Designer credit and the original source are shown on every part page.
No. We are a print workshop, not a design studio. Every part here was created by an independent maker who is credited and linked on the part page, and we print their designs to order. If your part is not listed, send us the make and model and we will happily search the community libraries for an existing design. Each design's licence decides whether we can print it. If nothing exists, our design partner CEEQ Design can model a part from scratch as a paid design job.
