🖨️ No printer? We’ll print & post it.From £4 · UK delivery from £3.45 · Free Tracked 48 over £40Get an instant quote →
Low Profile tablet holder V2.0

Low Profile tablet holder V2.0

From £10.35 printed to order · UK postage from £3.45, free over £40 · dispatched within 5 working days (high demand)
Black Friday: 20% off orders with £20+ of prints, taken off at checkout, ends Monday 30 November, 11:59pm
Arrives damaged? Free reprint, just film the box being opened. Returns policy
Free community design ♥ 4,929 likes ↓ 19,600 downloads
🖨️ Get this printed · from £10.35

About this print

A low-profile tablet holder designed to mount under a kitchen cabinet, folding flat when not in use so it sits behind the cabinet lip and stays out of sight. The design is compatible with a range of tablets from various manufacturers. A printed spring mechanism holds the latch in position. PETG is a sensible material choice for kitchen use, as it tolerates the slightly higher temperatures and humidity common in that environment.

From the original design page

Original maker's notes

By Mdavisgtm on Thingiverse · CC-BY-SA

This is version 2 of my low profile tablet holder, the original is here: http://www.thingiverse.com/thing:724308 This is a big upgrade from the original with pretty much everything working the way that I want. It takes about 25% less material to make, the latch works a lot better this time using printed springs to hold it, and it has struts that come down with the pad to make it more sturdy in the down position. Everything is designed to be printed without using supports. I was able to keep the width to only one inch so that it will disappear behind the bottom lip of your cabinet when folded up. The largest part to be printed will fit on a bed that is at least 6.3" (160mm) X 8.27" (210mm). It will fit any tablet under 11" wide x 7.5" tall x.43" thick. If you have a lot smaller tablet that you want to use this for then just scale all the parts down accordingly and it should work great! Some of the pieces do require gluing together. I included a couple assembly pictures and tried to include everything that you would need to make it. The part names also say how many of those parts are to be printed. The only hardware that you will need will be four screws to attach it to the bottom of your cabinet.
https://youtu.be/gMu3TxCTsDc
https://youtu.be/MHsnQJ2cxmE

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Low Profile tablet holder V2.0

For Low Profile tablet holder V2.0 we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source19,600
Likes at source4,929
Original modelView on Thingiverse
DesignerMdavisgtm
LicenceCC-BY-SA

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

  • STL, STEP and 3MF
  • Priced from £4
  • Free Tracked 48 over £40
  • Printed in-house in Hampshire
Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts

Before you order

🖨️ Get this printed · from £10.35