28mm Doors - Zombicide

Name: 28mm Doors - Zombicide (3D printed)
Brand: Hark Tech
Price: 4.00 GBP
Availability: InStock

From £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 4,561 likes ↓ 51,687 downloads

🖨️ Get this printed · from £4

Have us print this for you

Typical cost for this model in PLA: ~£4 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A set of miniature doors scaled for 28mm tabletop games, designed for Zombicide Black Plague but also compatible with Flashpoint, HeroQuest, Mansions of Madness and similar dungeon or horror titles. Eight variants are included, spanning arched medieval frames, wooden doors, barred prison doors and modern reinforced styles, available as complete plates or individual pieces. PLA works well for tabletop game terrain at this scale, picking up surface detail reliably and printing without specialist materials.

From the original design page

Original maker's notes

By Isolt on Thingiverse · CC-BY

Some doors designed for Zombicide Black Plague but will work with other games like flashpoint.
Medieval design along with a more modern version.
Door openings are around 36 high x 20mm wide. Base is 28mm square. About 40mm tall overall.
Plates and individual pieces are available.
Each plate is an entire door.

Z1 - Arched block frame door
Z2 - Rectangular wooden door
Z3 - Arched column door (single opening door)
Z4 - Modern rectangular door
Z5 - Improved arched column door with 2 opening doors (more pieces)
Z6 - Prison/Barred door
Z7 - Modern reinforced door
Z8 - Modern wooden door
Z9 - Modern door
Z10 - Modern steel door

They use a universal base (except Z5).
"Door Base - Dual Hinge" will allow the door to be hung left or right.
"Door Base - Small" has a smaller rectangular base.
"Door Base - Left Pivot (mirrored)" will allow the door to be hung on the other side of the frame without the extra hole the dual hinge base has.
Z2, Z4, Z6, Z7, Z8, Z9 and Z10 use the same frame.
Z4 and Z7 doors are identical front and back.
Z6 is a single piece door.

13.01.2020 "Door Base - Small" added
19.10.2017 Z6-10 added. Z3/5 base modified
23.09.2016 Z5 dual hinged door added. Z3 fixed
06.03.2017 Z6 door added, parts renamed

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing 28mm Doors - Zombicide

For 28mm Doors - Zombicide we would normally reach for PLA, or resin for the finest detail — PLA captures detail cheaply, and resin is an option where the very finest features matter. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	51,687
Likes at source	4,561
Original model	View on Thingiverse
Designer	Isolt
Licence	CC-BY

28mm board boardgame boardgames board game door Dungeon dungeons and dragons fantasy flashpoint game heroquest Mansions of madness miniature miniatures mordheim RPG strategy tactics wargame wargaming warhammer Zombicide

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts