Arduino Mega 2560 Snug Case

Name: Arduino Mega 2560 Snug Case (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 1,740 likes ↓ 30,344 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A close-fitting protective case for the Arduino Mega 2560 microcontroller board. The design includes screw mounts for the board, a snap-fit lid, and four openings on top to give visibility of the board's status LEDs. Compatible shields can be fitted over the closed case without removing it. PLA is well suited for electronics enclosures, providing the stiffness and dimensional accuracy needed for a snug fit around the board and reliable snap closures.

From the original design page

Original maker's notes

By Esquilo on Thingiverse · CC-BY-SA

A snug fitting case for the Arduino Mega 2560 with screw board mounts and a snap top. Shields may be installed over the top of the case. There are four holes on the top to view the four LEDs on the Arduino board. These holes can accommodate Bivar PLP2-250 light pipes for a more polished look.

The screws for the Arduino board are #2 x 1/4" thread rolling screws.

This case was derived from my [Arduino Uno Snug Case](http://www.thingiverse.com/thing:994827).

For the Raspberry Pi, see my [Raspberry Pi Snug Case](http://www.thingiverse.com/thing:1637227).

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Arduino Mega 2560 Snug Case

For Arduino Mega 2560 Snug Case we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	30,344
Likes at source	1,740
Original model	View on Thingiverse
Designer	Esquilo
Licence	CC-BY-SA

arduino arduino case Arduino Mega case

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts