Raspberry Pi Display Case

Name: Raspberry Pi Display Case (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,170 likes ↓ 35,298 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

An enclosure for the Raspberry Pi 2 and 3 Model B, designed to house the board alongside a touchscreen LCD display. The micro SD card slot remains accessible from outside the case, and the design holds the card in place even if the spring-loaded slot mechanism fails. The Raspberry Pi runs passively cooled inside, with no provision for a heatsink or fan. PLA suits this application, as the enclosure is not exposed to significant heat.

From the original design page

Original maker's notes

By ftobler on Thingiverse · CC-BY

A simple display case for the Raspberry Pi 2 & 3 Model B. I used a 3.5inch touchscreen LCD, which is purchased from ebay. Link and guide is listed below. The micro SD card is accessible from outside. A special feature is, that it is held in place, even when the spring loaded mechanism of the sd slot fails (which happened here). The raspi is entirely passive cooled. I have not used a heat sink or a fan. Do not print assembly.stl. I have three different top parts. I only used and printed that width the display. I used some weak glue to bind the parts together.
#####In case you need some changes to the model to fit your Display, there is a [customizer][1] If this is not enough for you, feel free to send me a message :) User-specified models: raspiBplusCase_top_differentCutout.stl raspiBplusCase_top_extraTall.stl
[display is from ebay][2] [guide to bring it to life][3] (I used the raspbian image) [1]: https://www.thingiverse.com/thing:2395683 [2]: http://www.ebay.com/itm/111717376150?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT [3]: http://www.waveshare.com/wiki/3.5inch_RPi_LCD_%28A%29

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Raspberry Pi Display Case

For Raspberry Pi Display Case we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	35,298
Likes at source	2,170
Original model	View on Thingiverse
Designer	ftobler
Licence	CC-BY

case computer display enclosure raspberry Raspberry Pi raspberry pi case raspi Touch Touchscreen

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts