Poseable Human Hand 16 points of Articulation

Name: Poseable Human Hand 16 points of Articulation (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by jasonwelsh · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 3,901 likes ↓ 36,686 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A poseable human hand model with 16 points of articulation across the fingers and thumb, intended as an artist's reference tool, a desk object, or a display prop. The joints allow the hand to be positioned into a range of poses and held in place without additional fixings. It prints at various scales, with 100 percent producing a full-sized hand. PLA handles this model well, as the articulated joints benefit from the material's rigidity to maintain a set position under light pressure.

From the original design page

Original maker's notes

By jasonwelsh on Thingiverse · CC-BY-SA

Need a hand model? Are you a poor artist that can barely afford the next packet of Ramen Noodles? Is the art school you're going to making you pay ridiculous prices for stuff like this? Can't get a grip on why these things cost so much?

Screw them ! Bribe a friend who has a 3D Printer to print you a hand!

Point out things in style!

Or you can just set it on your desk and let it hold stuff?

Anyway wanted a challenge.. Hands are tough to make.. Enjoy the hand.

NOW the hand in the image is at 50% scale. If you print it at 100% you will get a full sized hand. Which is great if you needed it to be that big. SO PAY ATTENTION!!
I made 100% sure that the smaller one was easy to glue together. So the bigger one should be a snap. The knuckles will need to be glued and vised while they dry but other than that the rest is really easy. No sanding required unless your printer sucks.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Poseable Human Hand 16 points of Articulation

For Poseable Human Hand 16 points of Articulation we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	36,686
Likes at source	3,901
Original model	View on Thingiverse
Designer	jasonwelsh
Licence	CC-BY-SA

hand posable hand

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts